Netbios Hacking.

Hello Friends,
Steps to show to do ” Net bios Hacking”
THIS NETBIOS HACKING GUIDE  WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND GAINING ACCESS TO IT’S  HARD-DISK OR PRINTER.NETBIOS HACK IS THE EASIEST WAY TO  BREAK INTO A REMOTE COMPUTER.

STEP-BY-STEP NETBIOS HACKING PROCEDURE
1.Open command prompt
2. In the command prompt use the “net view” command
( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP-TOOLS”  SOFTWARE BY ENTERING RANGE OF IP ADDRESSS.BY THIS METHOD YOU CAN SCAN  NUMBER OF COMPUTERS AT A TIME).
Example: C:\>net view \\219.64.55.112
The above is an example for operation using command prompt.”net view”  is one of the netbios command to view the shared resources of the  remote computer.Here “219.64.55.112″ is an IP address of remote  computer that is to be hacked through Netbios.You have to substitute a  vlaid IP address in it’s  place.If succeeded a list of HARD-DISK DRIVES & PRINTERS are  shown.If not an error message is displayed. So repeat the procedure 2  with a different IP address.
3. After succeeding, use the “net use” command in the command  prompt.The “net use” is another netbios command which makes it possible  to hack remote drives or printers.
Example-1:
C:\>net use D: \\219.64.55.112\F
Example-2:
C:\>net use G: \\219.64.55.112\SharedDocs
Example-3:
C:\>net use I: \\219.64.55.112\Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to  access remote computer’s hard-disk.
NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES  INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND ROM-DRIVES ON YOUR  COMPUTER.THAT IS IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY  DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND  PROMPT
F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives  that you want to hack. “Myprint” is the name of remote computer’s  printer.These are displayed after giving “net use” command.  “219.64.55.112″ is the IP address of remote computer that you want to  hack.
4. After succeeding your computer will give a message that “The  command completed successfully“. Once you get  the above message you are only one step away from hacking the computer.
Now open “My Computer” you will see a new “Hard-Disk drive”(Shared)  with the specified name.You can open it and access remote computer’s  Hard-Drive.You can copy files,music,folders etc. from victim’s  hard-drive.You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system.You can access files\folders quickly  through “Command Prompt”.
NOTE: If Remote Computer’s Firewall Is Enabled Your Computer  Will Not Succeed In Gaining Access To Remote Computer Through  Netbios.That is Netbios Hacking Is Not Possible In This Situation.(An  Error Message Is Displayed).So Repeat The Procedure 2,3 With Different  IP Address.